Description
Description
Description:
Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
Fault-tolerant design, the relay will not move even if the control line is broken.
Power indicator (green), relay status indicator (red).
The interface is designed humanized, and all the interfaces can be directly connected by wiring terminals, which is very convenient.
Features:
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for avoidance of malfunction
Power supply indicator lamp
Control indicator lamp
Two module interface:
1. DC+: Connect the power supply positive pole (voltage 5V).
2. DC-: Connect the power negative pole.
3. IN: Low level (5V) control relay pull in.
Relay output terminal:
1. NO: Relay normal open, the relay suspends before pulling in, and then short-connect with the COM.
2. COM: Relay common interface
3. NC: Relay normal close, short connected with COM before pulling inand suspended after pulling in.
Package Included:
1 x 1 Channel 5V Relay
1 x 1 Channel 5V Relay
Reviews
There are no reviews yet.